RBoard with PIC32 & mruby/c
Introduction
Welcome to the world of mruby/cmruby/c is a very compact language for microcontrollers compared to CRuby and mruby.
RBoard is an introductory board for those who want to use Ruby (mruby/c) on microcontrollers.
It is implemented as low-level as possible and can support various sensors.
Since mruby/c is installed as standard, development using mruby/cIDE is possible without using a dedicated IDE such as MPLABX.
In addition, since it is equipped with a GROVE port, various sensors and actuators can be used without soldering.
Information about each version can be found on the release page=> Release Page
For more information about GROVE, please visit this page
For more information about mruby/c, please visit this page
Source Code
License：BSD 3-ClauseCopyright：Shimane Johoshori Center Inc.
https://github.com/YoshihiroOgura/pic32mx170_mrubyc
Schematic and PCB Data
License：CC-BY-NC-SA 3.0Copyright：Shimane Johoshori Center Inc. or YoshihiroOgura
https://easyeda.com/YoshihiroOgura/rboard
Demo Video
Temperature Data Wireless Transmission 0:00~0:29Wall Detection Autonomous Driving 0:30~0:50
otto Control 0:51~1:11
Where to Buy
Warranty Information
We only cover initial defects.(Within 7 days of purchase)For inquiries, please email us at (sjc@sjc-inc.co.jp)
We are not responsible for any damages that may occur as a result of using this product.
Contact Us
For questions or requests regarding the program, please use the issues on the source code.For requests regarding the PCB, please use the comment section on EasyEDA.
For other inquiries, please email us at (sjc@sjc-inc.co.jp).
We appreciate your feedback!
If you have any questions or comments, feel free to reach out to me on Twitter m(_ _"m)Follow @morisuteisyon
This document is published under the BSD 3-Clause License.